code 36
Thread Starter
Intermediate
Joined: Apr 2004
Posts: 25
Likes: 0
From: Johnston RI
code 36
I have an 88. I'm getting code 36. I've checked the connections to the relays and the maf. I've tried switching the 2 relays and the same code reappears after I cleared the computer. Should I replace the 2 relays and am I better off buying ac delco. Thanks, any and all advise apperciated.
Team Owner
Joined: Jan 2003
Posts: 20,324
Likes: 250
From: Summerland B.C. Canada
Thread Starter
Intermediate
Joined: Apr 2004
Posts: 25
Likes: 0
From: Johnston RI
Yesterday I purchased the 2 relays, replaced them and cleared the computer code. I started my vette and let it run for a while then shut itdown and tested again for trouble codes. This time it was clear. Last night I used it for a while, made a stop, restarted and drove home. No codes. So far all looks good. Just wanted to pass this along to future forum readers that may be searching for info with similar problem. The info I found during my searches was very helpful.
Melting Slicks
Joined: Apr 2000
Posts: 2,408
Likes: 3
From: Bel Air Md
Yesterday I purchased the 2 relays, replaced them and cleared the computer code. I started my vette and let it run for a while then shut itdown and tested again for trouble codes. This time it was clear. Last night I used it for a while, made a stop, restarted and drove home. No codes. So far all looks good. Just wanted to pass this along to future forum readers that may be searching for info with similar problem. The info I found during my searches was very helpful.
