How to replace auto shift indicator
Thread Starter
Instructor
Joined: Sep 2007
Posts: 129
Likes: 0
From: Ewa Beach Hawaii
How to replace auto shift indicator
'87 coupe.
I am replacing the plexiglas auto shift indicator. Is there any short cuts for this? My Haynes and Chiltons do not really give good explanation, FSM is on order.
Thanks Guys!
I am replacing the plexiglas auto shift indicator. Is there any short cuts for this? My Haynes and Chiltons do not really give good explanation, FSM is on order.
Thanks Guys!
Team Owner
Joined: May 2000
Posts: 53,686
Likes: 5,606
From: Plantation Florida USAF(Retired) 1966-1990
U.S. Air Force
St. Jude Donor '05 thru '26
NCM Sinkhole Donor
I can tell you have to take part drivers dash, than center dash and now you can take part center dash.
One you remove the center dash look close at the indicator, cause when you re-install make sure you slip the indicator into the bracket, or it won't work, and you will have to take a part the whole thing again.
You will have to remove the shifter ****, easy. Pull the button straight out, and look inside you will see a snap ring, remove it **** slips straight up.
Have fun. I have taken it apart several times. It's quick.
One you remove the center dash look close at the indicator, cause when you re-install make sure you slip the indicator into the bracket, or it won't work, and you will have to take a part the whole thing again.
You will have to remove the shifter ****, easy. Pull the button straight out, and look inside you will see a snap ring, remove it **** slips straight up.
Have fun. I have taken it apart several times. It's quick.
