Water Drains ???
Thread Starter
Racer
Joined: Aug 2001
Posts: 304
Likes: 0
From: Spartanburg s.c.
Water Drains ???
Anyone using the water drains that go in the rear corners of the coup's??? I see that 2 holes have to be drilled....Anybody got ant tips on installation????Thanks!!!
Racer
Joined: Sep 1999
Posts: 433
Likes: 0
From: Durham NC
Re: Water Drains ??? (24power)
I did this about a year ago. Yes drill a hole in the corner at the lowest point. You need to take the inside wheel well plastic off as the tupbe will drain onto the upper inside of this plastic . I went to the hardware strore and bought some 3/8 plastic tubing, brass fitting and glued them in. use avery sharpe and small drill bit to keep from chipping the fiber glass.
Race Director
Joined: Mar 1999
Posts: 18,226
Likes: 0
From: I live in my own little world
NC Events Coordinator
Re: Water Drains ??? (24power)
Got'm on the '94, and they work ok. Gotta tell ya though that i bought the "kit" from Ecklers or MAD (i don't remember which) and was VERY disappointed in what you got for your money. You're better off putting your own "kit" together at the harware store for less than $5.
