new owner with problem
Thread Starter
2nd Gear
Joined: Apr 2009
Posts: 2
Likes: 0
From: toronto ontario
new owner with problem
Water pump quit & berfore idiot light came on and cracked heads,heads were replaced by myself but i dont have the proper torque for the rockers? Starts and runs great but i would prefer to have proper torque
Drifting
Joined: Aug 2006
Posts: 1,624
Likes: 2
From: Canandaigua New York
If they are hydraulic lifters there is no need to torque them.
I usually back each one off until they start to clatter, then tighten until the clatter disappears. And finally give it about another 1 and a half turns.
Usually works fine that way with no problems.
I usually back each one off until they start to clatter, then tighten until the clatter disappears. And finally give it about another 1 and a half turns.
Usually works fine that way with no problems.
Le Mans Master
Joined: Feb 2008
Posts: 8,515
Likes: 255
From: Rochester New York
