94 headlight motor
Tech Contributor
Joined: Aug 2006
Posts: 9,933
Likes: 103
From: Peoria Arizona.. Resident Gold Cylon
Welcome to the forum
Yes the Delran bushings are beginning to slip on the left side
Also here is the best write up Ive seen on doing the install. With all Props to ZR-Juan
http://home.comcast.net/~zrjuan/headlight.html
Yes the Delran bushings are beginning to slip on the left side
Also here is the best write up Ive seen on doing the install. With all Props to ZR-Juan
http://home.comcast.net/~zrjuan/headlight.html
Racer
Joined: Jul 2006
Posts: 339
Likes: 0
From: Stick-yer-head-in-an-oven Arizona
Suspect that your "plastic" bushings in the gearing mechanism of your headlight rotator assy, are starting to wear out - common occurance.
See: http://forums.corvetteforum.com/c4-t...-question.html
There are bushing/gear kits available through the Corvette parts vendors. You can get exact replacement parts - plastic - or you can spend a little more and get brass parts that will last much longer.
See: http://forums.corvetteforum.com/c4-t...-question.html
There are bushing/gear kits available through the Corvette parts vendors. You can get exact replacement parts - plastic - or you can spend a little more and get brass parts that will last much longer.
