window door stop
Thread Starter
Advanced
Joined: May 2011
Posts: 82
Likes: 0
window door stop
94 vette coupe, window goes way up in front, removed door panel and found window guide stop broke off, will order new one but do I need the J 220055 tool from GM as the book says? If not what else works and any tips for replacement? Thanks
Racer
Joined: Oct 2010
Posts: 403
Likes: 15
From: Clarksville Tennessee
I used standard tools
but remember these are side-specific and if your windows are tinted, be extra, extra careful to keep from scratching the soft tint. Be careful anyway.
The stop removal was more difficult than the install if I remember right.
The stop removal was more difficult than the install if I remember right.
Le Mans Master
Joined: Feb 2000
Posts: 9,060
Likes: 214
From: Epping NH
This is what I used, was a piece of cake to remove/replace the stop guides.
http://www.harborfreight.com/adjusta...source=linking
http://www.harborfreight.com/adjusta...source=linking
Le Mans Master
Joined: Feb 2000
Posts: 9,060
Likes: 214
From: Epping NH
Also a article on replacing the guides:
http://www.corvettefever.com/techart...***/index.html
Oh and buy the guides from Keen Corvette Parts whom I believe is a CF supporting vendor:
http://www.keenparts.com/pages/searc...26&Submit.y=14
Also since you're going to have the door apart, would be a good time to replace the outer window seals if they look like crap.
http://www.corvettefever.com/techart...***/index.html
Oh and buy the guides from Keen Corvette Parts whom I believe is a CF supporting vendor:
http://www.keenparts.com/pages/searc...26&Submit.y=14
Also since you're going to have the door apart, would be a good time to replace the outer window seals if they look like crap.
Premium Supporting Vendor
Joined: Nov 2008
Posts: 1,074
Likes: 10
From: Cleves Ohio
Also a article on replacing the guides:
http://www.corvettefever.com/techart...***/index.html
Oh and buy the guides from Keen Corvette Parts whom I believe is a CF supporting vendor:
http://www.keenparts.com/pages/searc...26&Submit.y=14
Also since you're going to have the door apart, would be a good time to replace the outer window seals if they look like crap.
http://www.corvettefever.com/techart...***/index.html
Oh and buy the guides from Keen Corvette Parts whom I believe is a CF supporting vendor:
http://www.keenparts.com/pages/searc...26&Submit.y=14
Also since you're going to have the door apart, would be a good time to replace the outer window seals if they look like crap.
Kevin
