odd brake problem
Thread Starter
Heel & Toe
Joined: May 2011
Posts: 17
Likes: 0
From: Kissimmee Fl
odd brake problem
I just had a new (re manufactured) brake booster and injectors replaced on my 1991 now there seems to be a lot of travel in the pedal and if im dont pump them before I get out the third brake light stays lit. also the cruise isnt working anymore I think the pedal is always on the dump valve is there an adjustment for the pedal feel I just had a brake fluid flush and fill so I know there bled and the fluid is good...
Melting Slicks
Joined: Sep 2008
Posts: 2,376
Likes: 111
From: Cherokee National Forest TN
Pull the hush panel, adjust the switch(s) closer to the brake pedal tab.
The booster actuating rod length from booster to pedal varies by manufacturer. After booster 2 installation the switches needed adjustment. Booster 3 needed a 1/4" longer
actuating rod.
The booster actuating rod length from booster to pedal varies by manufacturer. After booster 2 installation the switches needed adjustment. Booster 3 needed a 1/4" longer
actuating rod.
