Notices
C4 General Discussion General C4 Corvette Discussion not covered in Tech

engine idel

Old 01-27-2016, 03:26 PM
  #1  
luckydoy
Cruising
Thread Starter
 
luckydoy's Avatar
 
Member Since: Oct 2015
Location: Winchester Tn.
Posts: 11
Received 0 Likes on 0 Posts
Default engine idel

I have a 92 c4 and recently my car has started cutting out at low rpms or when running thru the gears in between shifts and going back on the gas. I have new plugs, wires, new o2 sensors also have low coolant light coming on and off, coolant level is fine, someone took the radiator sensor out and can not find the wire, if someone has a photo of this it would help.
Old 01-27-2016, 04:39 PM
  #2  
antfarmer2
Race Director
 
antfarmer2's Avatar
 
Member Since: Mar 2015
Posts: 15,926
Received 578 Likes on 555 Posts
Default

might just need to burp the air out and would look at the digital temp sensor or connection. and the idle control valve or clean. iac

Last edited by antfarmer2; 01-27-2016 at 04:52 PM.
Old 01-27-2016, 08:40 PM
  #3  
DanielRicany
Melting Slicks
 
DanielRicany's Avatar
 
Member Since: Jun 2013
Posts: 3,065
Received 36 Likes on 34 Posts
Default

Could be a head gasket leak. Under intense vacuum pressure when you close the throttle at high RPMs, coolant is being sucked through the gasket and when you hit the gas again it is misfiring on the coolant.

Get notified of new replies

To engine idel



Thread Tools
Search this Thread
Quick Reply: engine idel



All times are GMT -4. The time now is 09:03 AM.