Obd1
Thread Starter
Pro
Joined: Nov 2014
Posts: 527
Likes: 23
From: Mishawaka Indiana
Obd1
92 Six speed
I'm not seeing it in my FSM so does anyone here know what the pin-outs are on the ecm port? I'm getting what looks to be a communication error while trying to data-log the car and not sure what pins to look at.
I'm not seeing it in my FSM so does anyone here know what the pin-outs are on the ecm port? I'm getting what looks to be a communication error while trying to data-log the car and not sure what pins to look at.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Pro
Joined: Nov 2014
Posts: 527
Likes: 23
From: Mishawaka Indiana
I logged a bit today and worked great. Thanks again! I looked through Tunerpro and saw the silence setting. Is that something I can change on my own? The ABS lights stay on when I start the program, I know it shouldn't effect the logging but would like to prevent them if possible. Also, I've been told I can't make any changes being OBD1 which is OK with me but who is a good chip burner to analyze the datalog and burn a new chip?