When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It looks like the stud on your booster is short - that's why the bracket is hanging loose. Bolts and studs should have at least 2-3 threads showing when the nut is torqued down (see Macaroni's photo).Yours looks like -1 threads (below the face of the nut). It actually appears that the master cylinder casting base is a lot thicker on yours, and that may be the reason...
Agreed. The casting is different. The bolts on the booster are too short. A new investigation is needed. Thank you for the information, photo, and replies.
Bracket for Battery Cables
