96 Vette Keyless Entry Programming
Thread Starter
Heel & Toe
Joined: Oct 2003
Posts: 17
Likes: 0
From: Fort Worth Texas
96 Vette Keyless Entry Programming
I have a 1996 LT4 Vette and I need to program a keyless remote to the car. I don't have any remotes currently programmed to the car but purchased one via eBay and don't know how to program it to the car.
Any suggestions. Thanks!!
COREY :confused:
Any suggestions. Thanks!!
COREY :confused:
Melting Slicks
Joined: Jan 2003
Posts: 2,716
Likes: 0
From: Cartersville GA
Re: 96 Vette Keyless Entry Programming (fortworth396)
Found this in tech tips:
1. Place transmitter and any optional transmitter 10 feet or more away
from the car.
2. Turn the ignition key to the ON
position.
3. Push the TRIP/ODO button on the DIC twice.
4.
Within 5 Seconds, push and hold the FUEL/INFO button on the DIC until the
PKE light on the DIC comes on and stays on.
5. Turn the ignition to
the OFF position, but leave the key in the ignition. Thee PKE light will
come on and begin flashing. (When I programmed mine the light never
flashed but everything worked )
6. Bring one transmitter into
range. When the system recognizes the transmitter, the PKE light will stay
on. ( I had to hit the lock button on the transmitter before it was
recognized )
7. To program an optional transmitter, move the first
transmitter out of range and repeat step 6
8. Remove the key from
the ignition or turn the ignition ON.
1. Place transmitter and any optional transmitter 10 feet or more away
from the car.
2. Turn the ignition key to the ON
position.
3. Push the TRIP/ODO button on the DIC twice.
4.
Within 5 Seconds, push and hold the FUEL/INFO button on the DIC until the
PKE light on the DIC comes on and stays on.
5. Turn the ignition to
the OFF position, but leave the key in the ignition. Thee PKE light will
come on and begin flashing. (When I programmed mine the light never
flashed but everything worked )
6. Bring one transmitter into
range. When the system recognizes the transmitter, the PKE light will stay
on. ( I had to hit the lock button on the transmitter before it was
recognized )
7. To program an optional transmitter, move the first
transmitter out of range and repeat step 6
8. Remove the key from
the ignition or turn the ignition ON.
