Front 'Bumber"
Thread Starter
Instructor
Joined: Sep 2003
Posts: 120
Likes: 0
Front 'Bumber"
Since all I ask are dumb ?, Here's another one. Is the front 'bumber' on a '95 fiberglass, or at least something that can be repaired instead of replaced. Long story short, I have a 4"X4" 'dent' in the upper part of the facia. It took out my turn, fog, parking etc along with it.(I have no idea how) so that has to be replaced also. My own fault, but al least on my own property. Any input appreciated
Melting Slicks
Joined: Apr 2002
Posts: 2,118
Likes: 0
From: St. Charles, MO Route 66 Corvette Club
I have a used plastic energy absorber (goes under the bumper cover to give the shape of the bumper) that I will sell if you are interested. It is intact and not damaged.
SAM
SAM
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
