FS:New Ross Custom 2618 Forged Pistons
11-24-2008, 01:21 PM
#1
Burning Brakes
Thread Starter
Member Since: Nov 2006
Location: Portsmouth Virginia 396LT4 435RWHP/400RWTQ Best so far 11.26 @ 123mph
Posts: 1,102
Likes: 0
Received 1 Like
on
1 Post
FS:New Ross Custom 2618 Forged Pistons
New Ross custom 2618T-61 forged aluminum pistons .040" over ordered for an LT1 job and not used. They are the inverted -16cc dome type. These are not the 4032 silicon forged type so they will require a minimum .004" clearance. Not really recommended for knock sensor engines due to increased clearance required unless you program out the sensors.These will work with a 3.750" stroke crank with a 5.85" rod using a 9.00" deck height block giving you a "0" zero deck or a 3.500" crank with 6.00" rods using a stock 9.025" deck height block for a "0" zero deck. These are not gas ported.
The specs are:
Compression height 1.274"
Net dome -16cc
Dish depth .155
Int valve depth .280
Exh. valve depth .260
Ring grooves 1/16,1/16, 3/16
Pin dia. .927 x 2.950
Piston weight 466grams
Dbl. spirol locks (4 each piston)
Paid 720.00 thru Ross. Asking 320.00 shipped in USA.
The specs are:
Compression height 1.274"
Net dome -16cc
Dish depth .155
Int valve depth .280
Exh. valve depth .260
Ring grooves 1/16,1/16, 3/16
Pin dia. .927 x 2.950
Piston weight 466grams
Dbl. spirol locks (4 each piston)
Paid 720.00 thru Ross. Asking 320.00 shipped in USA.
Last edited by PDQUIK95; 12-16-2008 at 10:46 AM. Reason: price lowered
