Butterkup

Do you still have the targa top? If so, can you PM price and where it would ship from?

Thanks!
Butterkup

thedesertvette

Hi, how much for the shifter console trim plate shipped to 93535 if in good condition?

WillieHolmes

Does the lights work? Are the motors good?

slick_1

does it work?do you have it still? and if so how much

slick_1

oops should have scrolled further

imaginateer

Power Antenna ?

onepiper57

Hi

Do you still have the targa top? If so, how much with shipping to danville Illinois 61832?

Dru

johnnyboyC4

How much for the A/C? My switch went out in mine and nobody sells just the fan switch, so I may have to buy another A/C unit.
Shipped to 76052

usmc_butler

If you have it I need the driver door panel upper trim piece for a 87 (I believe it is the same from 85-89)? PM Me

icemaiden73

Do you still have the door panels if so i need the peice that goes around the handle on the inside the black trim part both sides mine are cracked. Also need one of the power door lock switches. And the horn plate i have the botton but my plate underneath it with the metal contact is broke.

PreynMantis

PM Sent

reidry

I need the following:

left and right extensions that run from the skid plates to the frame
left and right lower, forward inner fender liners
drivers headlight assembly if wiring is undamaged

I could also use some other miscellaneous parts in the area forward of the driver's wheel. If you could post a picture of that area or PM me, I can describe them.

Thanks,

Ryan

Sky Vette

FYI : Apparently the OP hasn't posted in this thread for over a month . . .

cmjuhl

PM Yesterday???

smile5

are you still parting this car out, I'm in need of the 9th injector if you have one. thanks

AUTO90VETTE

Looking for all of the interior dash trim pieces?

cutnitclose

How much for the corvette emblem on the back & the parking brake handle (please)....

reddzx

I need a heater fan ****

MBE111

I am looking for a steering column that will swap into my 1986 coupe with manual transmission. I do not need the steering wheel. The column should be tight side to side and up and down
Thanks

popo8

Do you have the plastic covers for where the top stores inthe hatch.... I hope that describes it good enough. If you do, let me know what color and how much to 19607.


PM me please, or write me at popo8@comcast.net