Datamaster Help!!
Thread Starter
Racer
Joined: Sep 2003
Posts: 368
Likes: 0
From: Chicago IL
Datamaster Help!!
I have the AutoProm from Craig moates which allows me to pass through data from OBD port to computer. The problm I have is in the Comm Ports selection. On the 'device manager' of my laptop, the comm port that the latop sees my connected to is Comm 4 or 5. those are the only ports I have available on the back of the computer. Now, when I go to select one of those ports on the datamaster software, port 4 is not available for selection, only port 3. And port 5 is not even listed. Do you have any ideas what may be the problem? What if I had TunerPro running in the background, would that cause a problem?
The car is a 1990 L98 with the stock computer. Laptop is new Dell with windows XP.
The car is a 1990 L98 with the stock computer. Laptop is new Dell with windows XP.
Drifting
Joined: Oct 2002
Posts: 1,773
Likes: 66
From: SoCal
Something is definitely wrong there. But you can try the easy way out and trick it. Device Manager Goto Ports, then get the Properties, select port settings, then Advanced, at the bottom where it says COM port number change it to 1 and see if it works. The COM port for 1 should be I/O range 03F8-03FF, and IRQ 4. Good Luck
Racer
Joined: Jan 2004
Posts: 458
Likes: 1
From: NY
Originally Posted by 1992B4C
I have the AutoProm from Craig moates which allows me to pass through data from OBD port to computer. The problm I have is in the Comm Ports selection. On the 'device manager' of my laptop, the comm port that the latop sees my connected to is Comm 4 or 5. those are the only ports I have available on the back of the computer. Now, when I go to select one of those ports on the datamaster software, port 4 is not available for selection, only port 3. And port 5 is not even listed. Do you have any ideas what may be the problem? What if I had TunerPro running in the background, would that cause a problem?
The car is a 1990 L98 with the stock computer. Laptop is new Dell with windows XP.
The car is a 1990 L98 with the stock computer. Laptop is new Dell with windows XP.
I had the same problem but I was working on a 95 lt1. I bought a new Dell Inspiron 1000 and was useing a usb to serial port adaptor with the ALDL cable from AKM Cables. Datamaster wouldn't let me choose the port I needed to.
I used up all my 20 free runs trying to figure it out so I sent the dell back and got a laptop with a serial port. Good luck, and if you figure it out I would be interested in knowing how.
Team Owner
Joined: Sep 2003
Posts: 20,176
Likes: 673
From: Freedom is never more than one generation away from extinction.
St. Jude '03 thru '24
Originally Posted by 1992B4C
What if I had TunerPro running in the background, would that cause a problem?
I'm using the USB-Serial adapter from Moates and the driver downloaded from his website. Open the Hardware Device Manager, click & expand the Ports Group. Open the Properties window for the USB Serial Port and click on the Port Settings tab, then click on the Advanced Button. Here you will find the control to reassign the COM Port Number for this device.
-JRC-
Thread Starter
Racer
Joined: Sep 2003
Posts: 368
Likes: 0
From: Chicago IL
Well, I did not figure out what the problem was exactly.....
I plugged in the auto prom after setting the switch to "pass-through". Then I turned the computer on. Then ONLY opened datamaster and COM4 was available. Selected it and was then able to datalog. I then opened TunerPro RT and it could not detect the Autoprom until I closed the Datamaster program (and the same went to TunerCats TunerRT)
I am guessing that my problem was that I had the TunerPro RT linked to the Autoprom befor I opened the datamaster program, but ?????
Oh well, there went 5 of my first 20 free logs.
I plugged in the auto prom after setting the switch to "pass-through". Then I turned the computer on. Then ONLY opened datamaster and COM4 was available. Selected it and was then able to datalog. I then opened TunerPro RT and it could not detect the Autoprom until I closed the Datamaster program (and the same went to TunerCats TunerRT)
I am guessing that my problem was that I had the TunerPro RT linked to the Autoprom befor I opened the datamaster program, but ?????
Oh well, there went 5 of my first 20 free logs.
Team Owner
Joined: Sep 2003
Posts: 20,176
Likes: 673
From: Freedom is never more than one generation away from extinction.
St. Jude '03 thru '24
Originally Posted by 1992B4C
Well, I did not figure out what the problem was exactly....I am guessing that my problem was that I had the TunerPro RT linked to the Autoprom befor I opened the datamaster program, but ????
Thread Starter
Racer
Joined: Sep 2003
Posts: 368
Likes: 0
From: Chicago IL
that had confused me b/c I can have both TunerPro RT and TunerRT open at the same time and communicate with the AutoProm with either. But with the Datamaster, I have to have all the other programs off, and restart the computer opening datamaster first.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Safety Car
Joined: Apr 2004
Posts: 4,532
Likes: 7
From: Lahaina Hi
On most of the newer computers ,(laptops) you need to turn off all inferred devices in the manager.
Turn your com port off for the modem.Restart the computer and make sure the USB is hooked to the system.
On some systems you need a 10 ohm resistor between the comunication port on the ADL on the car.
Radio shack has them.
Turn your com port off for the modem.Restart the computer and make sure the USB is hooked to the system.
On some systems you need a 10 ohm resistor between the comunication port on the ADL on the car.
Radio shack has them.
