When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i want to install a fast system in a 93 lt1 who do i contact about getting the wiring harness for the gauges? also, who do i need to contact about ltcc coil packs? any info will be helpful for i want to shop around. thanks joe
Post this in the C4 FI section. A lot of guys there is running FAST.
I am running the DFI Gen VII and is very pleased with it. you might want to look intot that as well. If you are interested in DFI ask forum member TJWong, he is very knowledgeable in DFI and can get you very good prices on these units.
I've been using Mac's harnesses for quite awhile... I was an Accel EMIC back when the old Gen 6's were still prolific and used a ton of his harnesses. Buy a harness from him and the FAST system, or just the harness and a Gen 7 DFI from Tom Wong (who I would highly recommend as well).
-Jeb
I've been using Mac's harnesses for quite awhile... I was an Accel EMIC back when the old Gen 6's were still prolific and used a ton of his harnesses. Buy a harness from him and the FAST system, or just the harness and a Gen 7 DFI from Tom Wong (who I would highly recommend as well).
-Jeb
Here's the text of an e-mail I received from Mac on 1/30:
"Hi Arnie,
Sorry about the delay in getting back to you. At the current time I am not building any adapters. Health problems are forcing me to sell that portion of my business. If you want to stay in touch, I will direct you to the new owners once the sale has been made. Thank you for your patience. Mac"
So you might want to wait if you can or find another source.