Optispark bolt size

Reply Subscribe

Thread Tools

Search this Thread

Feb 11, 2005 | 01:39 PM

BIGJIM13

Thread Starter

Drifting

Joined: Oct 2003

Posts: 1,348

Likes: 18

From: Dallas Texas

Optispark bolt size

What size are the screws to take the cap off of the optispark? Torx??
Thanks

Feb 11, 2005 | 03:07 PM

MikeC4

Melting Slicks

Joined: Oct 2004

Posts: 2,510

Likes: 4

From: Austin Texas

Quote:

Originally Posted by BIGJIM13

What size are the screws to take the cap off of the optispark? Torx??
Thanks

from what I understand, it is just an INVERTED torx.

Here is an older thread covering this topic:
http://forums.corvetteforum.com/show...=inverted+torx

Feb 11, 2005 | 07:18 PM

Redeasysport

Le Mans Master

Joined: Dec 2004

Posts: 5,789

Likes: 8

From: Myrtle Beach SC

St. Jude Donor '05-'06

Size E-5 inverted torx I have read.

Feb 12, 2005 | 12:05 AM

Mo_Bandy

Melting Slicks

Joined: Dec 2000

Posts: 2,719

Likes: 60

From: Fremont Oh

Some folks take a torx screw and weld it to a nut and use a regular socket to use the screw head for removal...

Hope that my help...

Mo

Feb 14, 2005 | 01:44 PM

BIGJIM13

Thread Starter

Drifting

Joined: Oct 2003

Posts: 1,348

Likes: 18

From: Dallas Texas

Distributor rotor torx size

Thanks
does anyone know the torx size to take out the rotor?

Feb 14, 2005 | 02:37 PM

MikeC4

Melting Slicks

Joined: Oct 2004

Posts: 2,510

Likes: 4

From: Austin Texas

Quote:

Originally Posted by BIGJIM13

Thanks
does anyone know the torx size to take out the rotor?

Don't know for sure, but this guy says the rotor Torx size is "really small" !

I would just buy a cheap set of Torx "screwdriver type" wrenches. I do know that the Opti torx screws do not require He-amn type torque, as so much of the unit is made of high impact plastic.....

If you haven't seen this web page, it shows the dis-assmebly procedure for the Optispark unit:

http://www.charm.net/~mchaney/optisprk/optisprk.htm

Good luck, I am about 2 weeks away from replacing my Opti and WP. Are you planning on pulling your Timing Chain cover, and replacing the O-ring seals??
just curious.....

Last edited by MikeC4; Feb 14, 2005 at 02:48 PM.