Vortech V-2 on a modified engine?
Thread Starter
Le Mans Master
Joined: Feb 2002
Posts: 5,970
Likes: 20
From: San Marcos Texas
Vortech V-2 on a modified engine?
Will an intercooled Vortech V2 system be able to keep up with my motor at 6-8psi of boost. My engine runs up to 7200rpm easily and I am worried it wont keep up. I found a good deal on a system with the Carrol bracketry. What do you guys think...I am planing on switching my cam to a bigger roller designed for boost. See my sig for the current setup.
Melting Slicks
Joined: Dec 2000
Posts: 2,719
Likes: 60
From: Fremont Oh
Chris the V2 will support 680 hp max CFM is about 1000 . I would be more concerned about your rpm's the V2 limit is like 53,000 rpm even though some run them higher. With a 3.125 you are maxed at about 6200 rpm.
Talk to Greg Carroll ( Blowerworks) he is extremely knowledgable and can give you a definative answer with your mods. Tell him Mo sent ya
I'm thinking you would be ok but you will be towards the top end of a V2 S trim...
Mo
Talk to Greg Carroll ( Blowerworks) he is extremely knowledgable and can give you a definative answer with your mods. Tell him Mo sent ya
I'm thinking you would be ok but you will be towards the top end of a V2 S trim...
Mo
