Motor mount help
Thread Starter
Instructor
Joined: Sep 2001
Posts: 155
Likes: 0
From: Helena AL.
Motor mount help
My new project is going to make quite a bit more power. Energy suspension don't seem to list motor mounts for the C4, what are the options? I don't care to run a solid mount, are there any other vendors that supply a good mount or is the stock mount the only thing out there?
Thanks for any help guys.
Jerry Myers Twinturbovette.net
Thanks for any help guys.
Jerry Myers Twinturbovette.net
Drifting
Joined: Nov 2003
Posts: 1,637
Likes: 2
From: Honeoye Ny
the silicone Lt1 mounts ought to be better than the older L98 rubber ones. Other than that it's custom work. Breakin motor mounts are you? Build a torque limiter out of a energy suspension sway bar end link.
Thread Starter
Instructor
Joined: Sep 2001
Posts: 155
Likes: 0
From: Helena AL.
I will have to go look at a set of Lt1 mounts.
Im not breaking anything yet, the motor is still on the stand, as soon as i get some motor mounts and buy the new F.A.S.T. I might break some things.
Im not breaking anything yet, the motor is still on the stand, as soon as i get some motor mounts and buy the new F.A.S.T. I might break some things.
Drifting
Joined: Nov 2003
Posts: 1,637
Likes: 2
From: Honeoye Ny
I made my own on the pass side (down side of torque) But thats so I could run a 4" pipe thru there 
http://www.baldturbofreak.com/projec...Picture892.jpg
http://www.baldturbofreak.com/projec...Picture892.jpg
Thread Starter
Instructor
Joined: Sep 2001
Posts: 155
Likes: 0
From: Helena AL.
Thread Starter
Instructor
Joined: Sep 2001
Posts: 155
Likes: 0
From: Helena AL.
I made some motor mounts tonight. Im just going to use a solid mount in the car, just affraid a polly mount might come apart on me. Also going to be really close to the hood with the throttle body elbo. I have never run a solid mount but have friends with Buicks who have to tie theirs down to the frame. Guess I will see if I like them or not.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Apr 2004
Posts: 4,532
Likes: 7
From: Lahaina Hi
Jeg's has the polly mount ,I bought the chrome.
Standard L989 350 engine mount. But I did chain the motor on the drivers side just incase.
I did pull the wheels when I launched,I did not feel it but the guys were watching.
The chain helped alot but I tweaked the front left upper control arm it was chained to, so I have to change it to the frame under the break master cylander.
Standard L989 350 engine mount. But I did chain the motor on the drivers side just incase.
I did pull the wheels when I launched,I did not feel it but the guys were watching.
The chain helped alot but I tweaked the front left upper control arm it was chained to, so I have to change it to the frame under the break master cylander.
