96 AC Dash flow problem
Thread Starter
1st Gear
Joined: May 2005
Posts: 1
Likes: 0
96 AC Dash flow problem
Hi. I have a 96 LT4 with electronic AC control. When I turn the AC on, it comes out all ports (floor, top of dash, etc) EXCEPT to front dash. I can choose the various prot combination manually, but any one that uses the front dash doesn't work correctly. Usually after several minutes that will eventually work as well, though lately, it hasn't.
Anyone know what is the problem?
Is this somnething I can practically fix myself?
Thanks!
Jim.
P.s. Feel free to email me directly at rocknroll@adelphia.net if you have some help!
Anyone know what is the problem?
Is this somnething I can practically fix myself?
Thanks!
Jim.
P.s. Feel free to email me directly at rocknroll@adelphia.net if you have some help!
Melting Slicks
Joined: Dec 2004
Posts: 2,137
Likes: 5
From: Howard PA
Take a look at one of my old threads, I think there's a design flaw with these, a lot of folks have the same problem.
http://forums.corvetteforum.com/show...AC&forum_id=48
http://forums.corvetteforum.com/show...AC&forum_id=48
