Going for Alignment, again
Thread Starter
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Going for Alignment, again
Last Saturday when ToyC4 was in town we were poking around under my hood and found some alignment shims just sitting on one of the frame rails, that's not good. Turns out ALL of my shims from the driver's side rear bolt were gone, not nice. I put all the shims back which were sitting on the frame rail but I had no way of knowing for sure if that was all of them. For all I know they could be anywhere between my house and WKU.
Anyway I put them back and now the car is pulling ever so slightly to the right, it is not an inflation problem. So my friend is going to go over the alignment again for me today, I'll drop it off at lunch. I'll make it a point to double check that all those bolts don't loosen up this time.
Anyway I put them back and now the car is pulling ever so slightly to the right, it is not an inflation problem. So my friend is going to go over the alignment again for me today, I'll drop it off at lunch. I'll make it a point to double check that all those bolts don't loosen up this time.
