ZZ4 engine build update [pics]
Thread Starter
Melting Slicks
Joined: Oct 2000
Posts: 2,019
Likes: 2
From: Na
ZZ4 engine build update [pics]
She's almost ready to be dropped in with a few things here and there that still have to be done. I almost hate thinking that it will have to hide in the engine compartment for the fact that it's a friggin work of art and it should be on perminent display in my garage but then again that won't do me much good either. Well, here she is in all here glory. Enjoy!
Specs:
- GMPP ZZ4 shortblock
- 10:1 CR
- Lingenfelter 74219 roller cam
- Dart Pro1 aluminum 200cc heads 64cc
- Accel Superram intake
- 1.5 Crane Gold roller rockers
- Hamburgers L98 oil pan
- Melling M55a oil pump
- Cloyes billet roller timing set
- 6.25" Fluidamper
- Powermaster XS mini starter
- Edelbrock l98 waterpump
- Lingenfelter valve covers
- Accel blueprint distributor
- Scat SFI flexplate
- CompCams 2 piece billet timing cover
- TPiS happy hooker (for install)
Specs:
- GMPP ZZ4 shortblock
- 10:1 CR
- Lingenfelter 74219 roller cam
- Dart Pro1 aluminum 200cc heads 64cc
- Accel Superram intake
- 1.5 Crane Gold roller rockers
- Hamburgers L98 oil pan
- Melling M55a oil pump
- Cloyes billet roller timing set
- 6.25" Fluidamper
- Powermaster XS mini starter
- Edelbrock l98 waterpump
- Lingenfelter valve covers
- Accel blueprint distributor
- Scat SFI flexplate
- CompCams 2 piece billet timing cover
- TPiS happy hooker (for install)
Race Director
Joined: May 2003
Posts: 10,749
Likes: 41
Originally Posted by NUckINg FuTS
She's almost ready to be dropped in with a few things here and there that still have to be done. I almost hate thinking that it will have to hide in the engine compartment for the fact that it's a friggin work of art and it should be on perminent display in my garage but then again that won't do me much good either. Well, here she is in all here glory. Enjoy!
Specs:
- GMPP ZZ4 shortblock
- 10:1 CR
- Lingenfelter 74219 roller cam
- Dart Pro1 aluminum 200cc heads 64cc
- Accel Superram intake
- 1.5 Crane Gold roller rockers
- Hamburgers L98 oil pan
- Melling M55a oil pump
- Cloyes billet roller timing set
- 6.25" Fluidamper
- Powermaster XS mini starter
- Edelbrock l98 waterpump
- Lingenfelter valve covers
- Accel blueprint distributor
- Scat SFI flexplate
- CompCams 2 piece billet timing cover
- TPiS happy hooker (for install)
Specs:
- GMPP ZZ4 shortblock
- 10:1 CR
- Lingenfelter 74219 roller cam
- Dart Pro1 aluminum 200cc heads 64cc
- Accel Superram intake
- 1.5 Crane Gold roller rockers
- Hamburgers L98 oil pan
- Melling M55a oil pump
- Cloyes billet roller timing set
- 6.25" Fluidamper
- Powermaster XS mini starter
- Edelbrock l98 waterpump
- Lingenfelter valve covers
- Accel blueprint distributor
- Scat SFI flexplate
- CompCams 2 piece billet timing cover
- TPiS happy hooker (for install)
Looks amazing, Curous as to what kind of power you are hoping the motor will make?
Thread Starter
Melting Slicks
Joined: Oct 2000
Posts: 2,019
Likes: 2
From: Na
Originally Posted by cuisinartvette
Your'e right! That motor is too pretty to get dirty 
Dig those valve covers! What did you pay for those?
Dig those valve covers! What did you pay for those?
Appreciate all the compliments!
I snagged the valve covers off eBay new for $150. IIRC, LPE sells them for $325. They are by far the best quality valve covers I've come across thus far and not to mention some of the best looking as well
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Melting Slicks
Joined: Oct 2000
Posts: 2,019
Likes: 2
From: Na
Originally Posted by 89 Paul in Cal
Drool.....
just wondering, is the engine full internal balance?
Nice pics
just wondering, is the engine full internal balance?
Nice pics
Just like most other 1 piece rear main 350's this one requires a weighted flexplate but the damper is neutral balanced
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,063
From: altered state
St. Jude Donor '05
Had to cilck on your thread again to stare at those valvecovers....They are calling my name
Better than ****!
What brand base? Looks like its had some portwork done
Better than ****!
What brand base? Looks like its had some portwork done
Last edited by cv67; Jul 5, 2005 at 10:39 AM.
