When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just removed my rear spring and found several more shims on one side vs the other - the shop that installed the rear spring and lowering bolts last spring said he had a hard time getting the car to set level (Left - Right) Could this have been the problem? one lowering bolt had at least 2" of thread used / showing and the other had about 1/8 showing...
Also, how many shims should be there (each side under clamp) and does this have any effect on the ride height?