HELP!! Shortie Header Install....
Thread Starter
Pro
Joined: Aug 2005
Posts: 656
Likes: 0
From: Fort Worth TX
HELP!! Shortie Header Install....
I got the hooker shorties for my 92. I have pried and prodded them into place but the back 2 bolts on the pass side are giving me fits. Ive tried everything, hex bolts allen head bolts, but i still cant get good access to them to be able to torque them. Any suggestions?
Race Director
Joined: Feb 2003
Posts: 11,671
Likes: 20
From: Lake Wylie SC
Standby, let me look at mine................Okay, I used a small head torque wrench that had a rachet head and a 3/8s drive allen bit. I tightened the bolts with my 1/4 drive rachet with a smaller length allen bit. I can't remember if I had the starter out to get at the most rear bolt from under the car. BTW, the starter comes out easily. Disregard my PM I sent you.
Last edited by Strick; Sep 17, 2005 at 08:54 PM.
Thread Starter
Pro
Joined: Aug 2005
Posts: 656
Likes: 0
From: Fort Worth TX
They are hooker shorties but I dont knkow what model. The prob is that the bolts sit too close to the headder pipes to get hex heads on. So i got the allen head, now I cant get the darn socket on them, no room in there...
