need help TPI
Thread Starter
Instructor
Joined: Feb 2005
Posts: 136
Likes: 0
need help TPI
Replacing my intake on my tpi thinking about the edelbrock anyone try it out what do you think hp gains would be on the adition intake a new 58mm throtle body and air foil just some guess any recomendations would be helpful! 
trying to achive about 350 hp what would you recomend
trying to achive about 350 hp what would you recomend
Last edited by bickel; Feb 17, 2006 at 05:00 PM.
Team Owner
Joined: Sep 2001
Posts: 62,154
Likes: 1,731
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
No 58, and no airfoil. Do not waste the money.
Edelbrock is not really any different from the Accel/TPiS style of TPI systems. 25-35hp ballpark from the runners & manifold, and port the plenum.
Edelbrock is not really any different from the Accel/TPiS style of TPI systems. 25-35hp ballpark from the runners & manifold, and port the plenum.
Melting Slicks
Joined: Jan 2001
Posts: 2,940
Likes: 5
From: Chesapeake VA
I have been told that the TPIS intake is the Edlebrock intake. Edlebrock makes it for TPIS. They just put TPIS' logo on it.
I just did this swap (and I am still tweaking it), and I posted a thread with dyno graphs and everything. You can read all about it here:
http://forums.corvetteforum.com/show...ke&forum_id=48
I just did this swap (and I am still tweaking it), and I posted a thread with dyno graphs and everything. You can read all about it here:
http://forums.corvetteforum.com/show...ke&forum_id=48
