335's on the back?
Instructor
Joined: Feb 2004
Posts: 163
Likes: 0
From: holland
Originally Posted by c4pappy
j-stingray,
Are those the 38 offset or the 50 offset? I may be wrong but I thought that ZR-1 was 38 which should move the tire to the outside more. Does the tire ever rub under hard cornering or over bumps? This definately looks do-able from those pictures.
Thanks for the pictures.
Are those the 38 offset or the 50 offset? I may be wrong but I thought that ZR-1 was 38 which should move the tire to the outside more. Does the tire ever rub under hard cornering or over bumps? This definately looks do-able from those pictures.
Thanks for the pictures.
if you think that the tire is sticking out to much you also can go
with a 315 tire but when you have the 335 tire it
will also protect your wheel from scraping sidewalks
the grip is super from the pirelli,s i already bought another set
and i have NO wheelbaring problems !!
the wheel is not only going outworth but also inworth so the wheel is
not hanging more to the out or the inn side so the wear is not exessive
on the bearing ,it is if you have the 50mm offset there is more wheel
going to the outside of the car than the inside so there CAN be a litlle more wear
but i dont know for sure you have to ask that to someone else
who has the 50 mm offset
greetzz jeff stingray
Le Mans Master
Joined: Feb 1999
Posts: 9,938
Likes: 38
From: South Carolina
St. Jude Donor '03 & '05
Originally Posted by j-stingray
these are the 38 mm offset ,they are original zr1 wheels
if you think that the tire is sticking out to much you also can go
with a 315 tire but when you have the 335 tire it
will also protect your wheel from scraping sidewalks
the grip is super from the pirelli,s i already bought another set
and i have NO wheelbaring problems !!
the wheel is not only going outworth but also inworth so the wheel is
not hanging more to the out or the inn side so the wear is not exessive
on the bearing ,it is if you have the 50mm offset there is more wheel
going to the outside of the car than the inside so there CAN be a litlle more wear
but i dont know for sure you have to ask that to someone else
who has the 50 mm offset
greetzz jeff stingray
if you think that the tire is sticking out to much you also can go
with a 315 tire but when you have the 335 tire it
will also protect your wheel from scraping sidewalks
the grip is super from the pirelli,s i already bought another set
and i have NO wheelbaring problems !!
the wheel is not only going outworth but also inworth so the wheel is
not hanging more to the out or the inn side so the wear is not exessive
on the bearing ,it is if you have the 50mm offset there is more wheel
going to the outside of the car than the inside so there CAN be a litlle more wear
but i dont know for sure you have to ask that to someone else
who has the 50 mm offset
greetzz jeff stingray
Last edited by steve40th; Feb 21, 2006 at 11:16 PM.
