What performance break fluid
Thread Starter
Safety Car
Joined: Feb 2004
Posts: 3,786
Likes: 0
From: Minneapolis MN
What performance break fluid
I am installing new rotors and front calipers I thought I might as well change break fluid I seen some that exceeded dot3 and dot4 at parts store any recommendation's
Instructor
Joined: Jul 2004
Posts: 132
Likes: 1
From: San Diego California
Switching back to DOT 3 from DOT 4.
I just replaced the Brake master cylinder, rotors and pads and put in the Dot 4 Syntec. I noticed the brakes are pulsating sometimes during hard braking or when reversing. I'm going to switch back to DOT 3 after reading the posts on this last week.
Team Owner
Joined: Sep 2001
Posts: 62,171
Likes: 1,735
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Find the recent thread, should be a couple pages down by now.
DOT4 is better for someone who races more and is willing to change more often, if not then DOT3 is just fine.
Valvoline Synpower is something you'll always find, but the Ford Heavy Duty is best among the DOT3's that I know of. I believe some stores will carry it behind the counter.
http://www.evilplastic.com/bfluid.htm
DOT4 is better for someone who races more and is willing to change more often, if not then DOT3 is just fine.
Valvoline Synpower is something you'll always find, but the Ford Heavy Duty is best among the DOT3's that I know of. I believe some stores will carry it behind the counter.
http://www.evilplastic.com/bfluid.htm
Racer
Joined: Apr 2004
Posts: 487
Likes: 0
From: Huntsville AL
Just installed speed bleeders and ATE Super Blue fluid this w/e in my car. I like this fluid since you can easily tell the difference between the old fluid when flushing. I ordered it from raceshopper.com. It's working great. You can see some ratings and prices of various choices at the very bottom of this page: http://www.bobbyarchermotorsports.com/pdf_2848_3.pdf
Race Director
Joined: Dec 1999
Posts: 11,182
Likes: 2
From: Almost all Skyline Cruises Vettes at Waterside 1-5
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Originally Posted by NT Vettman
I just flushed the brakes on my 90 and used Valvoline's SynPower synthetic brake fuid. It has a high dry boiling point and is compatible with all other fluids.
This stuff is fantastic...doesn't absorb moisture, burn off or loose efficiency under hard braking.I used to get one 650 mile wekend on the dragon, since using this stuff, I get three before I need to flush
seeya
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
