Computer work need to be done
Thread Starter
Racer
Joined: Sep 2005
Posts: 297
Likes: 0
From: Wauseon Ohio
Computer work needs to be done
Alright i got the engine rebuilt and thrown back in and it runs well. Now its time for me to get some computer work done. So i went to the PCM for less website to order a chip or somthing, then i realized i do not know where my ECM is. I read from thread i searched and it says its above my battery, i still can find it. To say the truth, im not really sure if i just need a new custom chip, somthing to plug in between my ecm connections, or reprogrammed ECM... i need somthing though. Any advice would be helpful.
Last edited by Biff Buyer; Apr 30, 2006 at 02:16 PM. Reason: misspelled words
Team Owner
Joined: Aug 2000
Posts: 40,156
Likes: 45
From: San Pedro CA
your vette is a 1985...
as such, the ECM is in the dash board.
Get under the passengers side of the dash, it's way back near the fan blower box are.
Look up, and you will see two bolts (10mm) and a white plastic bracket thing.
Remove the bolts, the ECM will fall out.
The chip is in there.
as such, the ECM is in the dash board.
Get under the passengers side of the dash, it's way back near the fan blower box are.
Look up, and you will see two bolts (10mm) and a white plastic bracket thing.
Remove the bolts, the ECM will fall out.
The chip is in there.
