rerouting fuel lines

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2006 | 02:49 AM

85blkrose

Thread Starter

Racer

Joined: Sep 2004

Posts: 495

Likes: 0

From: berwick pennsylvania

rerouting fuel lines

anyone out there change both fuel lines over to braided line from the filter to fuel rail?if so what was needed lookin for parts. any help is appreciated.

Sep 17, 2006 | 03:52 AM

86PACER

Le Mans Master

Joined: Jan 2003

Posts: 5,858

Likes: 7

From: Santa Maria CA

Why do you want to do this?

Sep 17, 2006 | 03:57 AM

85blkrose

Thread Starter

Racer

Joined: Sep 2004

Posts: 495

Likes: 0

From: berwick pennsylvania

i have clearance issues with my tpis longtube headers. have heat wrap on them now but want them out of the way

Sep 18, 2006 | 03:22 AM

85blkrose

Thread Starter

Racer

Joined: Sep 2004

Posts: 495

Likes: 0

From: berwick pennsylvania

looks like this isnt a something many people have done

Sep 18, 2006 | 04:06 AM

pablocruise

Le Mans Master

Joined: Jul 2001

Posts: 8,183

Likes: 3

From: Santa Maria, CA

I had to do it for a stealthram

install. The holley kit included some barbed fittings, but I had to get the braded hose.
Had no probs.

Sep 18, 2006 | 04:11 AM

REDC4CORVETTE

Safety Car

Joined: Apr 2004

Posts: 4,532

Likes: 7

From: Lahaina Hi

I used steel brade hose and 3 hose clamps on each line and faired the lines.
I cut it after the filter and flaired the end.
To find a fitting for the fuel filter or the connector in line you will have to look around.
The lines are pipe thread and metric into the fuel rail.

Sep 18, 2006 | 04:57 AM

rodj

Le Mans Master

Joined: Aug 2000

Posts: 8,838

Likes: 31

From: Australia

If you want to make it look pretty at the fuel rails instead of barb fittings and hose clamps there is alway these to take a AN-6 fitting

eBay item #250014023809

Have seen them listed on other catalogs ,
Earls / Russell maybe
Check your rail fittings first , some have 2 the same size and some intakes (later ???) have 1 larger than the other.

Last edited by rodj; Sep 18, 2006 at 05:00 AM.

Sep 18, 2006 | 09:10 AM

mk842766

Pro

Joined: Aug 2000

Posts: 666

Likes: 0

From: Richmond TX

Quote:

Originally Posted by 85blkrose

anyone out there change both fuel lines over to braided line from the filter to fuel rail?if so what was needed lookin for parts. any help is appreciated.

Just did this with my 85, for the same reasons as you. Used an6 fittings, and braided hose. Only difference is, I routed mine to enter and return from the rear of the fuel rail, instead of the front. Much cleaner install...