Transmission problems need help
Thread Starter
Instructor
Joined: Feb 2006
Posts: 101
Likes: 0
From: Bradenton Florida
Transmission problems need help
I noticed that my trans. was running hot so I checked the fluid and noticed it smelled burnt. So, I had had the trans. flushed and the filter changed, but it still runs hot and the fluid smells burnt again. There is no other problems what could cause this. I want to fix this problem before it becomes a bigger problem. What could it be where do I start?????????
Race Director
Joined: Dec 2000
Posts: 17,551
Likes: 26
From: El Paso Texas
Are we talking standard or auto trans, and what year? Are we talking about the '87 in your profile?
Pete K is the resident transmission expert, and is quite helpful. You might drop him a PM.
But based upon personal experience, it sounds like the clutches are done for. Plan on a full rebuild. You say the fluid smells burnt....what color is it? In my case, the fluid turned kind of a chocolate brown and first gear started slipping badly.
Sorry, I know this probably wasn't what you wanted to hear.
Pete K is the resident transmission expert, and is quite helpful. You might drop him a PM.
But based upon personal experience, it sounds like the clutches are done for. Plan on a full rebuild. You say the fluid smells burnt....what color is it? In my case, the fluid turned kind of a chocolate brown and first gear started slipping badly.
Sorry, I know this probably wasn't what you wanted to hear.
Thread Starter
Instructor
Joined: Feb 2006
Posts: 101
Likes: 0
From: Bradenton Florida
They also said they could install a 2400 stall torque converter for 425-450 does this sound like a good price. I know I'll have install a cooler also, but I'll do that myself because they said that it could be $500 plus because of all the work involved
Race Director
Joined: Feb 2004
Posts: 12,518
Likes: 19
http://forums.corvetteforum.com/show....php?t=1556907
This link will describe how to check lock up. If the converter is not locking up, troubleshoot it before swapping the conveter. Are they going to supply and install a torque converter for $450?.The place that build my converters charges me $300 for a lock up, custom stalled 12 inch converter. In my opinion, this is a fair price. You can spend more and you can spend less, but be sure you buy a quality converter if you decide to change it. B&M and TCI are 2 brands to avoid(in my opinion)
This link will describe how to check lock up. If the converter is not locking up, troubleshoot it before swapping the conveter. Are they going to supply and install a torque converter for $450?.The place that build my converters charges me $300 for a lock up, custom stalled 12 inch converter. In my opinion, this is a fair price. You can spend more and you can spend less, but be sure you buy a quality converter if you decide to change it. B&M and TCI are 2 brands to avoid(in my opinion)
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
