Waterpump hardware?
Thread Starter
Pro
Joined: Feb 2005
Posts: 560
Likes: 0
From: Hamilton New Jersey
Waterpump hardware?
What do I need to install the water pump on my 86? I know there's a few studs that are suppose to be on it to hold on the serp setup, How many, how long, and where do they go? I guess I will be making my own from threaded rod as the origionals did not come with the car.. any info would be appreciated!
Instructor
Joined: Apr 2006
Posts: 194
Likes: 0
From: edmonton alberta
w/p studs and bolts you can still get them from gm and they have pics and can print it out for you ,but i think their both on pass side but cant remember 4 sure the best thing to do is take a trip to your local g.m dealer 
Thread Starter
Pro
Joined: Feb 2005
Posts: 560
Likes: 0
From: Hamilton New Jersey
I actually work for a gm dealer as a technician, checked with our parts department and they have been discontinued for a while now but are available through another company who buys discontinued parts from gm and stocks them, they however only have one size stud and I was under the impression they were 2 differnent sizes, though I could be wrong. The parts catalong leaves something to be desired as far as the pictures goes for this application, but I got em to order 2 of em for me. I'll see what I end up with 
Worst case I suppose I can get threaded rod and some nuts and cut it to length, but I'd rather have the factory hardware..
Worst case I suppose I can get threaded rod and some nuts and cut it to length, but I'd rather have the factory hardware..
