TPI Replacement Idea
Thread Starter
Advanced
Joined: Nov 2004
Posts: 79
Likes: 0
From: Richmond VA
TPI Replacement Idea
I stumbled across this one day looking at Ford perf. parts. Sullivan Performance makes an upper intake that will bolt to any Holley 4150 squarebolt pattern intake. It would take some mods to work with a vette's thottle body, but would allow using a victor EFI lower. It also has provision for EGR for those living in states where is matters. I am considering this for my motor when I finally build it and wanted some feedback. How much motor would you need to effectively use a setup like this and is it worth the time to pursue? At first glance, it seems that this would be less expensive than a SuperRam and would require less mod than a Holley SR.
Here is the link to the upper:
http://www.sullivanperformance.com/Y.../tbadapter.htm
Here is the link to the upper:
http://www.sullivanperformance.com/Y.../tbadapter.htm
Le Mans Master
Joined: Feb 2005
Posts: 6,481
Likes: 566
From: Clearwater Florida
Tpi
Take a look at the manifold from firstfuelinjection.com , while it may not be as exotic , it might make it easier to accomplish what you're trying to do.......MAKE HORSEPOWER !!!!! Good Luck !!
Race Director
Joined: Feb 2003
Posts: 16,475
Likes: 270
From: Kingman AZ
Cruise-In VII Veteran
Cruise-In VIII
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
