windshield wiper problem.........
Thread Starter
Drifting
Joined: Dec 2004
Posts: 1,393
Likes: 3
From: HOU TEX
windshield wiper problem.........
hey i have a 1994 C4, zf6. My windshield wipers have stopped working lately. Just wondering if anyone has some possible solutions..... i already thought about changing out the multifunctional switch, but i'm just wondering if there is anything else to look at? thanks in advance..........
Spoon
Spoon
Burning Brakes
Joined: Jul 2006
Posts: 1,230
Likes: 0
From: Sulphur LA
I had a problem with mine, and it ended up being a loose ground. On my lt4/6spd the ground for the wipermotor ( and a few other things ) is the one located on the driver side of the bellhousing. I found it blowing in the wind and after I put it back everything has worked fine
Tech Contributor
Joined: Aug 2006
Posts: 9,933
Likes: 103
From: Peoria Arizona.. Resident Gold Cylon
hey i have a 1994 C4, zf6. My windshield wipers have stopped working lately. Just wondering if anyone has some possible solutions..... i already thought about changing out the multifunctional switch, but i'm just wondering if there is anything else to look at? thanks in advance..........
Spoon
Spoon
But have you have checked the fuze right? Im assuming this since you moved on to the switch? Goldcylon
Thread Starter
Drifting
Joined: Dec 2004
Posts: 1,393
Likes: 3
From: HOU TEX
Tech Contributor
Joined: Aug 2006
Posts: 9,933
Likes: 103
From: Peoria Arizona.. Resident Gold Cylon
Well other than a bad switch, dead motor, grounding issue or other problem with the harness I cant think of anything else. Is it possible they are just stuck in a bind? Have you tried to help (nudge) them move with the switch powered on? Mine bound on my 90 coupe once but they bound and then just blew a fuse. Also are the wipers are parked under the hood Ive seen them bind as well especially if the blades have been replaced with the fatter bosch style vs trico/anco styles. Man I hate electrical queertrons!!! I hope you figure it out and good luck! Goldcylon
