Best Fuel Pressure Regulator?
Race Director
Joined: Jun 2004
Posts: 13,963
Likes: 709
From: WI
There was a recent post that they were available now. Was it ripped? When I got my Holly I cleaned up the drill hole for the vacuum fitting. It had typical sharp burrs from drilling. I have read that the Aeromotive unit is nice.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Jan 2003
Posts: 20,324
Likes: 250
From: Summerland B.C. Canada
Le Mans Master
Joined: Feb 2006
Posts: 8,753
Likes: 9
From: Louisiana
I asked this question before purchasing my AFPR and the majority seemed to like their Holley. So, I got one about 8 months ago and so far it hasn't let me down. I would also like to know if anyone knows where to get a spare diaphram.
Pro
Joined: Nov 2003
Posts: 692
Likes: 1
From: Peabody Ma.
Melting Slicks
Joined: Apr 2002
Posts: 2,118
Likes: 0
From: St. Charles, MO Route 66 Corvette Club
I just did a search on Google for Holley AFPR units and found the following:
Should you need information or parts assistance, please contact our Technical Service Department
at 1-270-781-9741, Monday through Friday, 7 a.m. to 5:00 p.m. Central Time. Please have the part number of the product you purchased when you call.
I will call them on Monday (I am retired
) and post what is learned from the phone call.
Should you need information or parts assistance, please contact our Technical Service Department
at 1-270-781-9741, Monday through Friday, 7 a.m. to 5:00 p.m. Central Time. Please have the part number of the product you purchased when you call.
I will call them on Monday (I am retired
) and post what is learned from the phone call.
Melting Slicks
Joined: Apr 2002
Posts: 2,118
Likes: 0
From: St. Charles, MO Route 66 Corvette Club
I contacted Holley Customer Service today at 270-781-9741 and learned that a replacemet diaphram IS available for purchase. The diaphram does not have a part number and is considered a "special order" from the above number. The cost of the replacement diaphram is $15.00 plus a $5.00 shipping and handling charge. Hope this info is helpful to those who use and like the Holley 512-501 regulator.
Team Owner
Joined: Jan 2003
Posts: 20,324
Likes: 250
From: Summerland B.C. Canada
I contacted Holley Customer Service today at 270-781-9741 and learned that a replacemet diaphram IS available for purchase. The diaphram does not have a part number and is considered a "special order" from the above number. The cost of the replacement diaphram is $15.00 plus a $5.00 shipping and handling charge. Hope this info is helpful to those who use and like the Holley 512-501 regulator.
They finally returned my email with "The diaphragm can be special ordered from tech service at 270-781-9741"I will be getting a back up
