injector size??
Team Owner
Joined: Sep 2001
Posts: 62,139
Likes: 1,728
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Its a 24lb injector, but rated at a different psi than the later ones
Last edited by vader86; Mar 17, 2007 at 02:43 PM.
Thread Starter
Pro
Joined: Oct 2004
Posts: 644
Likes: 15
From: Clarksville Tennessee
Thank for the response guys
. I think I may have one fuel injector leaking(#4cyclinder). I'm considerating installing my original injectors to verify if I actually have an leaking injector. Any suggestion??
. I think I may have one fuel injector leaking(#4cyclinder). I'm considerating installing my original injectors to verify if I actually have an leaking injector. Any suggestion??
Melting Slicks
Joined: Apr 2002
Posts: 2,118
Likes: 0
From: St. Charles, MO Route 66 Corvette Club
rssshen: consider sending the "old" injectors for cleaning and possible servicing before you reinstall them in your Vette. This will cost your maybe $100 and you will know what you have! I have used Rich Jensen at Cruzinpermance (rich@cruzinperformance.com) and was very satisfied with his services, costs and turnaround time. If you consider replacing you injectors, I would use the same flow rate injectors to avoid other car issues.
Thread Starter
Pro
Joined: Oct 2004
Posts: 644
Likes: 15
From: Clarksville Tennessee
rssshen: consider sending the "old" injectors for cleaning and possible servicing before you reinstall them in your Vette. This will cost your maybe $100 and you will know what you have! I have used Rich Jensen at Cruzinpermance (rich@cruzinperformance.com) and was very satisfied with his services, costs and turnaround time. If you consider replacing you injectors, I would use the same flow rate injectors to avoid other car issues.
Thanks Sam!! I just looked that the web site. I'll get set up with an appointement. I think the accel injectors I'm using is causing me problems (Spark plug fouling). I'm going back to the original Bosh.
