How to test MASS AIR FLOW SENSOR?
Melting Slicks
Joined: Aug 2003
Posts: 3,413
Likes: 404
From: Lakeville MI
First check the connection at the MAF.
Code 33 is the one you get when the MAF is disconnected. The raw signal goes high when the MAF is disconnected.
See your own thread in the Scan and Tune section for more troubleshooting info.
Code 33 is the one you get when the MAF is disconnected. The raw signal goes high when the MAF is disconnected.
See your own thread in the Scan and Tune section for more troubleshooting info.
Team Owner
Joined: Jan 2003
Posts: 20,335
Likes: 264
From: Summerland B.C. Canada
