hooker header 2149 install error...need help
Thread Starter
Instructor
Joined: Aug 2006
Posts: 220
Likes: 12
From: Hagerstown MD
hooker header 2149 install error...need help
ok all
today i went in to check for valve leak and other stuff
i went to tighten my header bolts and saw something i dont think is right
passenger sider header tube closest to the firewall
there is a tube that comes up from the heder tube looks like something should be mounted to it but there is nothing there
should this tube be caped off... its open now or did somebody forget todo something
85 vette with hooker 2149 headers
i do not know how to post pictures or i would
today i went in to check for valve leak and other stuff
i went to tighten my header bolts and saw something i dont think is right
passenger sider header tube closest to the firewall
there is a tube that comes up from the heder tube looks like something should be mounted to it but there is nothing there
should this tube be caped off... its open now or did somebody forget todo something
85 vette with hooker 2149 headers
i do not know how to post pictures or i would
Instructor
Joined: Jun 2004
Posts: 190
Likes: 0
I also have the 2149 headers. When I installed them, I fabricated a tube that would connect to my intake manifold for the EGR. Fast forward a couple of months down the road, and I go to install some roller rockers. I disconnect the EGR tube that I had fabricated because it goes over the valve cover a little bit, and I notice that there is no carbon on the inside of it. When I look down the flanged tube on the header, I see that is is welded to the outside of the primary (there is no hole for any exhaust gases to pass through). So I drilled a hole so that it could work. Maybe my set of header were an accident, but if yours are the same way, you won't need to cap that off.
Last edited by skunklookingcar; Jun 17, 2007 at 01:18 PM. Reason: spelling
Team Owner
Joined: Sep 2001
Posts: 62,146
Likes: 1,730
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
that is EGR, needs to be blocked off there and at the manifold
oops, if its 85, the EGR is internal....later cars would have to worry about capping at the manifold
oops, if its 85, the EGR is internal....later cars would have to worry about capping at the manifold
Last edited by vader86; Jun 17, 2007 at 04:15 PM.
Safety Car
Joined: Nov 2004
Posts: 4,991
Likes: 5
From: The Pines South Jersey
ok all
today i went in to check for valve leak and other stuff
i went to tighten my header bolts and saw something i dont think is right
passenger sider header tube closest to the firewall
there is a tube that comes up from the heder tube looks like something should be mounted to it but there is nothing there
should this tube be caped off... its open now or did somebody forget todo something
85 vette with hooker 2149 headers
i do not know how to post pictures or i would
today i went in to check for valve leak and other stuff
i went to tighten my header bolts and saw something i dont think is right
passenger sider header tube closest to the firewall
there is a tube that comes up from the heder tube looks like something should be mounted to it but there is nothing there
should this tube be caped off... its open now or did somebody forget todo something
85 vette with hooker 2149 headers
i do not know how to post pictures or i would
Drifting
Joined: Apr 2007
Posts: 1,291
Likes: 33
From: Chicago IL
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Thread Starter
Instructor
Joined: Aug 2006
Posts: 220
Likes: 12
From: Hagerstown MD
thank you all...it is not drilled through.......it had me very curious considering i failed emissions with high N20 so i figured possibly EGR
now im back to square 1
thank you all for your input
now im back to square 1
thank you all for your input
