87 setup
Thread Starter
Navigator
Joined: Aug 2006
Posts: 9
Likes: 0
87 setup
my 87 cp has been used by corvette fever mag for after market parts tech reports. ie camber and x frame,brakes (sloted rotors,ss brake hoses.balances spring)cooling system(water pump,fans,thermostat )engine (ign -plugs,wires,cap,rotor,ign mod ,coil all are accel)pcm new chip.accel 24 injecters,accel lower intake and runners. bbk throlle body. ajustable fuel regulater (set at 47 psi)slp air intake timing at 6degress(was at 10) when we started out we ran 14.2 1/4s now running about 14.0. we are getting ready to install stainless works long header, random teck cats and corsa cat back system. i need help with set up,seams like we should be runnig faster. help
