What Length PushRods?
Thread Starter
Le Mans Master
Joined: Feb 2000
Posts: 9,715
Likes: 27
From: Kempner Texas
What Length PushRods?
Just want to get an idea of the length pushrods you guys/gals have moved to when modding your engines.
Mods like reduced base circle camshafts, decking block, thicker/thinner head gaskets, cylinder head change, etc.
Thanks,
Jake
Mods like reduced base circle camshafts, decking block, thicker/thinner head gaskets, cylinder head change, etc.
Thanks,
Jake
Thread Starter
Le Mans Master
Joined: Feb 2000
Posts: 9,715
Likes: 27
From: Kempner Texas
Right. I measured mine with an adjustable pushrod checker and ordered the length I need. Preload's set and new engine's in the car now.
I was just wondering what lengths other guys are using; just for my information/curiousity.
Jake
I was just wondering what lengths other guys are using; just for my information/curiousity.
Jake
Race Director
Joined: Feb 2004
Posts: 12,518
Likes: 19
My 406 with retro fit roller cam uses 7.150
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
