CAM conversion
Thread Starter
Le Mans Master
Joined: Oct 2006
Posts: 7,484
Likes: 2
From: Dayton, OH HAWG: "this is Off Topic...it can get a bit north of care bears and strawberry shortcake in here"
St. Jude Donor '08-'09-'10-'11
CAM conversion
Quick and dirty.
I've got a CAM that was originally for a 95+ vented opti, the dowel pin was cut for a pre-vented opti. I'm assuming the pin can be replaced.
Anyone know how, or who, can do this for me?
Thanks!
EG
I've got a CAM that was originally for a 95+ vented opti, the dowel pin was cut for a pre-vented opti. I'm assuming the pin can be replaced.
Anyone know how, or who, can do this for me?
Thanks!
EG
Racer
Joined: Oct 2006
Posts: 298
Likes: 0
From: Churchville 18966 Pennsylvania
Are you sure it was cut? I was just reading on one of the cam sites recently that you can tap the pin in to the correct depth on the 92-94 installation.....mabey this was done and you can just pull the pin out to the proper length? just a guess.
Alan
Alan
Thread Starter
Le Mans Master
Joined: Oct 2006
Posts: 7,484
Likes: 2
From: Dayton, OH HAWG: "this is Off Topic...it can get a bit north of care bears and strawberry shortcake in here"
St. Jude Donor '08-'09-'10-'11
Not 100% sure, no, I just know it's way too short.
