please help with heads!!!
#1
Heel & Toe
Thread Starter
Member Since: Nov 2001
Location: Jasper Al
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
please help with heads!!!
I'm am going to put in an LT4 hot cam kit, LT4 pushrods, and new lifters. What heads should I get??? I am on a budget so should I buy new heads or have mine worked? If I had them worked who should I have do them??? Please include prices and how to get more info on them. Thanks in advance. :D :cool:
#2
Melting Slicks
Member Since: Dec 1999
Location: Austin, TX
Posts: 2,813
Likes: 0
Received 0 Likes
on
0 Posts
Re: please help with heads!!! (pearlbluevette)
Your best bet is probably to get your heads ported. A lot of guys here have had good luck with More Performance. Stock LT4 heads are good, but your LT1 heads with a good CNC porting will be much better. You could go with ported LT4 heads, but the castings are $$ and the overall result wouldn't be that much better.
Just make sure you get a new chip when you're all done!
Just make sure you get a new chip when you're all done!
#3
Heel & Toe
Thread Starter
Member Since: Nov 2001
Location: Jasper Al
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Re: please help with heads!!! (pearlbluevette)
Thanks, How can I get in touch with more perfomance and what are their prices???Thanks again :D :cool: