Stock pushrod length
Team Owner
Joined: Sep 2002
Posts: 22,209
Likes: 12
From: OBAMA IS HITLER
i think it's 7.200".
nonetheless. if you bought new heads & cam you need to verify.
http://www.compcams.com/information/Products/Pushrods/
nonetheless. if you bought new heads & cam you need to verify.
http://www.compcams.com/information/Products/Pushrods/
Thread Starter
Team Owner
Joined: Oct 2004
Posts: 35,065
Likes: 0
From: Bergen County, NJ Democrats, doing for the country what they did for Michigan
i think it's 7.200".
nonetheless. if you bought new heads & cam you need to verify.
http://www.compcams.com/information/Products/Pushrods/
nonetheless. if you bought new heads & cam you need to verify.
http://www.compcams.com/information/Products/Pushrods/
Safety Car
Joined: Apr 2005
Posts: 3,624
Likes: 431
From: Dale City VA
An 8" caliper will do the job as long as all you intend to do is 23 degree SBC's (or 302 brand X).
According to my Manley book:
Stock SBC flat tappet cam is 7.800
Stock SBC hyd roller cam is 7.195
Will
According to my Manley book:
Stock SBC flat tappet cam is 7.800
Stock SBC hyd roller cam is 7.195
Will
