clutch problems
Thread Starter
4th Gear
Joined: Nov 2006
Posts: 4
Likes: 0
clutch problems
Does anyone have any experiance having a dead clutch pedal? one nite I'm driving around town and the next morning I get in and the pedal is hitting the floor. thera was a little fluid on the ground so I check the resvoir and it was low so I filled it up and still no clutch pedal. I even looked to see if the fluid moved when I depressed the clutch and nothing happened. so before i pull the master and the slave i was hoping someone might have an insight to my problem. it's a 90 vett 6 speed, 112,000 miles any help would be great
Safety Car
Joined: Jan 2006
Posts: 3,566
Likes: 4
From: Mt Laurel NJ
St. Jude Donor '06-'07
At 112K, it's time to replace the Clutch master, slave and hose. Replacing just one compotent will only make the others fail sooner. Check out www.zfdoc.com. Just remember to use the GM fluid in the new master/hose/slave. It will last a lot longer that way.
Good luck
Good luck
Last edited by RandyJ75; Dec 4, 2007 at 10:52 PM.
Pro
Joined: Sep 2006
Posts: 702
Likes: 2
From: Conyers Ga
And make sure the "O" ring in the slave is installed correctly....
