C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

Convertible top install on a 1989

Thread Tools
 
Search this Thread
 
Old 01-09-2008, 08:06 PM
  #1  
10.5Vette
Burning Brakes
Thread Starter
 
10.5Vette's Avatar
 
Member Since: Sep 2006
Location: Dorr MI
Posts: 1,034
Received 3 Likes on 3 Posts

Default Convertible top install on a 1989

Found a pretty good deal on a 89 vert. Current owner has redone the interior completely. He has a new top, but it isn't installed. He says it looks like it's tricky and doesn't want to mess it up. So my question is how hard is this to do? I feel I'm very competent mechanically, but not so much on the interior type of stuff. Right now there is no top on the car at all.
Old 01-09-2008, 10:46 PM
  #2  
chucks88
Safety Car
 
chucks88's Avatar
 
Member Since: Oct 2001
Location: Connectivette
Posts: 4,763
Likes: 0
Received 1 Like on 1 Post

Default

Getting the old one off is half the battle. It took me about 12 hours to remove the old one(including complete removal of all the old glue residue) and just as long to put the new one on. I scored a video install VHS which has been floating around the forum for years which walked me through it.
Old 01-10-2008, 01:17 AM
  #3  
10.5Vette
Burning Brakes
Thread Starter
 
10.5Vette's Avatar
 
Member Since: Sep 2006
Location: Dorr MI
Posts: 1,034
Received 3 Likes on 3 Posts

Default

I'm not sure if I'm getting the car yet, but if I do it'd be nice to get a copy of that video!
Old 01-10-2008, 03:37 PM
  #4  
87 rag
Drifting
 
87 rag's Avatar
 
Member Since: May 2004
Location: Port McNicoll Ontario
Posts: 1,747
Likes: 0
Received 0 Likes on 0 Posts
Default

I just did mine in July.
It wasn't that tough to do, you just have to take your time, follow the instructions and be careful not to get glue where you don't want it.
I got some instructions from a forum member that helped a lot. He said they were notes that he transcribed from a poor quality video he had.
It could have been the video chucks88 said is floating around.
The top also came with instructions so between the two sets of instructions things went pretty smoothly.
PM me your email address and i can send you the instructions.
I think I've sent them to over 20 people so far.

Jeff
Old 01-10-2008, 04:29 PM
  #5  
10.5Vette
Burning Brakes
Thread Starter
 
10.5Vette's Avatar
 
Member Since: Sep 2006
Location: Dorr MI
Posts: 1,034
Received 3 Likes on 3 Posts

Default

PM sent to 87rag. Thanks for any help you can give me!
Old 01-10-2008, 07:06 PM
  #6  
chucks88
Safety Car
 
chucks88's Avatar
 
Member Since: Oct 2001
Location: Connectivette
Posts: 4,763
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by 59VetteFI
I'm not sure if I'm getting the car yet, but if I do it'd be nice to get a copy of that video!

I can do that. Let me know if you end up picking up the car.
Old 01-10-2008, 11:29 PM
  #7  
10.5Vette
Burning Brakes
Thread Starter
 
10.5Vette's Avatar
 
Member Since: Sep 2006
Location: Dorr MI
Posts: 1,034
Received 3 Likes on 3 Posts

Default

You guys have been very helpful, received instructions from 87 rag, and I will PM chucks88 if I get it. I should know early next week as owner is out of town for the weekend. He wants 5700 for it, but it's been sitting for a year and a half and he says it needs a tune up (easy). Also said radio doesn't work, but dome lights won't go off (?) and needs tires soon. I'll let you know if I get it or not. Thanks again. Does it sound like a good deal to you guys?

Last edited by 10.5Vette; 01-10-2008 at 11:59 PM.
Old 01-10-2008, 11:33 PM
  #8  
Siveck
Drifting
 
Siveck's Avatar
 
Member Since: Aug 2002
Location: Birmingham AL
Posts: 1,624
Received 76 Likes on 62 Posts

Default

I love my '89 vert . What options and colors does it have?
Old 01-10-2008, 11:58 PM
  #9  
10.5Vette
Burning Brakes
Thread Starter
 
10.5Vette's Avatar
 
Member Since: Sep 2006
Location: Dorr MI
Posts: 1,034
Received 3 Likes on 3 Posts

Default

Maroon/w black interior. All carpeting, seat covers are new. it has dual standard power seats, and Bose. But none of the perf. options. But I figure for that price if the rest of the car checks out I can add my own performance.
Old 01-11-2008, 12:01 AM
  #10  
Siveck
Drifting
 
Siveck's Avatar
 
Member Since: Aug 2002
Location: Birmingham AL
Posts: 1,624
Received 76 Likes on 62 Posts

Default

Make sure that the floorboards aren't busted or anything. Sounds like a nice ride for the price .
Old 01-14-2008, 11:36 AM
  #11  
mizzjodym
6th Gear
 
mizzjodym's Avatar
 
Member Since: Jan 2008
Location: Grand Junction Colorado
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default Vhs?

Hi. I am new to all this so I hope you don't think I am rude. I got a new top for my 89 Christmas of 06. My husband has no clue how to put it on that's why it' still not on. So anyway... he has worked in body shops before and is good at stuff like that so if we just had some sort of instructions or the vhs you were talking about I would be glad to pay you.. I very much appreciate it
mizzjody

Originally Posted by chucks88
Getting the old one off is half the battle. It took me about 12 hours to remove the old one(including complete removal of all the old glue residue) and just as long to put the new one on. I scored a video install VHS which has been floating around the forum for years which walked me through it.
Old 01-14-2008, 01:04 PM
  #12  
KeyWestJack
Pro
 
KeyWestJack's Avatar
 
Member Since: May 2006
Location: Pittsburgh PA
Posts: 583
Received 0 Likes on 0 Posts

Default

Old 01-14-2008, 08:47 PM
  #13  
chucks88
Safety Car
 
chucks88's Avatar
 
Member Since: Oct 2001
Location: Connectivette
Posts: 4,763
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by mizzjodym
Hi. I am new to all this so I hope you don't think I am rude. I got a new top for my 89 Christmas of 06. My husband has no clue how to put it on that's why it' still not on. So anyway... he has worked in body shops before and is good at stuff like that so if we just had some sort of instructions or the vhs you were talking about I would be glad to pay you.. I very much appreciate it
mizzjody

How can I say no to a damsel in dis dress........I mean distress

E-mail me your address and I'll get it out to you.......and I don't want your money
Old 01-14-2008, 08:51 PM
  #14  
chucks88
Safety Car
 
chucks88's Avatar
 
Member Since: Oct 2001
Location: Connectivette
Posts: 4,763
Likes: 0
Received 1 Like on 1 Post

Default

As long as I don't see you trying to sell it here...

http://stores.ebay.com/COLORADO-PACK-RATS

The idea is to pass it along to some other C4 brethren who could use it.
Old 01-15-2008, 01:46 PM
  #15  
mizzjodym
6th Gear
 
mizzjodym's Avatar
 
Member Since: Jan 2008
Location: Grand Junction Colorado
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

I would never do that and would be very happy to pass it along to someone else anytime.


Originally Posted by chucks88
As long as I don't see you trying to sell it here...

http://stores.ebay.com/COLORADO-PACK-RATS

The idea is to pass it along to some other C4 brethren who could use it.
Old 01-15-2008, 01:57 PM
  #16  
87 rag
Drifting
 
87 rag's Avatar
 
Member Since: May 2004
Location: Port McNicoll Ontario
Posts: 1,747
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mizzjodym
I would never do that and would be very happy to pass it along to someone else anytime.
Someone should convert it to digital and post it on the net somewhere like youtube or if it can't be posted publicly, at least we would be able to pass it around electronically or as a DVD.
Old 01-15-2008, 02:01 PM
  #17  
mizzjodym
6th Gear
 
mizzjodym's Avatar
 
Member Since: Jan 2008
Location: Grand Junction Colorado
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default DVD Digital ?

Originally Posted by 87 rag
Someone should convert it to digital and post it on the net somewhere like youtube or if it can't be posted publicly, at least we would be able to pass it around electronically or as a DVD.
Maybe that is what I am supposed to do with it to carry on
I will see what I can do when I get it. Good Plan!

Get notified of new replies

To Convertible top install on a 1989

Old 01-15-2008, 02:39 PM
  #18  
shawn 84&92
Burning Brakes
 
shawn 84&92's Avatar
 
Member Since: Sep 2004
Location: Arkansas
Posts: 1,097
Received 18 Likes on 17 Posts

Default

I have done two tops, they are not that bad. I had an article that I used from a Corvette mag to guide me on the first one. Look at how it come apart, it is nt very complicated. Just take your time. The hardest part for me was getting the back part to sit on the deck lid and not curl up. I am going to do my 92 in the next year or so. You can do it.
Shawn
Old 01-15-2008, 02:45 PM
  #19  
mizzjodym
6th Gear
 
mizzjodym's Avatar
 
Member Since: Jan 2008
Location: Grand Junction Colorado
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the support. Everyone here has made me feel better about getting this thing done. I have only been on here a few days and I already feel like part of the family.
Old 01-15-2008, 07:12 PM
  #20  
chucks88
Safety Car
 
chucks88's Avatar
 
Member Since: Oct 2001
Location: Connectivette
Posts: 4,763
Likes: 0
Received 1 Like on 1 Post

Default

I have the ability to burn it on a DVD and had been thinking of converting it for a couple months now......seems like just as good as any. Give me a couple days to get the chance to do it.

Chuck


Quick Reply: Convertible top install on a 1989



All times are GMT -4. The time now is 01:50 AM.