Restoring telescoping steering column. Am I missing a part?
Thread Starter
2nd Gear
Joined: Jan 2008
Posts: 2
Likes: 0
Restoring telescoping steering column. Am I missing a part?
I am restoring a tilt/telescoping 87 C4 steering column and I think I may be missing a part. It looks like there is something that is supposed to go between the telescoping spring and the turn signal canceling cam. Withouth something between the spring and cam the spring would be riding directly on the copper contacts in the cam. I know that the spring is used as a conductor for the horn but it seems like there should be something that snaps to the end of it and provides a better mechanical connection to the turn signal canceling cam.
Here is a picture of the parts I have:
This is how I assume they are supposed to be assembled. I there something missing?
Here is a picture of the parts I have:
This is how I assume they are supposed to be assembled. I there something missing?
Last edited by iokepa; Jan 27, 2008 at 06:16 PM.
Team Owner
Joined: Jan 2003
Posts: 20,306
Likes: 242
From: Summerland B.C. Canada
Thread Starter
2nd Gear
Joined: Jan 2008
Posts: 2
Likes: 0
Thank you 86PACER and AGENT 86. Are there any diagrams include the spring in my images? I know it attaches to the steering wheel but I would like to see a digram to make sure I am not missing something.
