guesstimate my hp and torque???
12-08-2001, 05:05 PM
#1
Melting Slicks
Thread Starter
Member Since: Dec 2001
Location: Texas
Posts: 2,049
Likes: 0
Received 0 Likes
on
0 Posts
guesstimate my hp and torque???
OK, sorry I've posted so many time already today guys, guess I'm a little post happy, this is my last q. Anyway, can anyone give me a rough estimate as to what kind of hp (rw or crank specify) and torque the set up in my sig will make, given little parts here and there added in or taken out. :confused:
12-08-2001, 06:13 PM
#3
NCM Bash 2008-2018
Member Since: Jul 1999
Location: Granby, MA Talladega Super Speedway Vettes 4 Vets Ambassador
Posts: 9,008
Received 75 Likes
on
60 Posts
Middle TN Events Coordinator
Cruise-In 1, 3, 9. 10 & 11 Veteran
Re: guesstimate my hp and torque??? (BowTieBlood)
hmm iam no expert on this one....and hope others will correct me if Iam wrong...but I would guess somewhere around 350-400 hp and something like 375-400 trq.
this sound about right guys?
by the way BowTieBlood....why the LT1 conversion....isn't it cheaper to buy a LT4 car?.....again I dont' know the exact numbers.....but just figured it would be cheaper to buy and LT4 and modify it....
keep it real
jeff
this sound about right guys?
by the way BowTieBlood....why the LT1 conversion....isn't it cheaper to buy a LT4 car?.....again I dont' know the exact numbers.....but just figured it would be cheaper to buy and LT4 and modify it....
keep it real
jeff
12-08-2001, 06:16 PM
#4
Melting Slicks
Thread Starter
Member Since: Dec 2001
Location: Texas
Posts: 2,049
Likes: 0
Received 0 Likes
on
0 Posts
Re: guesstimate my hp and torque??? (XtremeVette)
Hmm, the kit is like $2k but including some things (from what I'm told) that are a little better than the stock LT4, you might be right though, I've never seen an LT4 go for only that much more around here at least.
12-08-2001, 09:00 PM
#5
Melting Slicks
Thread Starter
Member Since: Dec 2001
Location: Texas
Posts: 2,049
Likes: 0
Received 0 Likes
on
0 Posts
Re: guesstimate my hp and torque??? (BowTieBlood)
Anyone else give me some more hp/torque guesses? and when you answer, do you mean rear wheel? :confused:
12-09-2001, 01:16 AM
#6
Team Owner
Member Since: Sep 2001
Location: Athens AL
Posts: 59,654
Received 1,401 Likes
on
1,017 Posts
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Re: guesstimate my hp and torque??? (BowTieBlood)
i'll go out on a limb and say 400hp 450 torque
12-09-2001, 01:46 AM
#7
Team Owner
Re: guesstimate my hp and torque??? (vader86)
A higher stall torque conveter and different gears don't do anything to your horsepower or torque.. you can just feel the power you have more.. and use it in a better way....
exhuast probalby good for 20-25 ... computer 5-10 ... 58mm TB 2-5 ...
LT4 conversion by itself would have you at 340-350.. so just add up the other things.. and I'd say:
i'd say 380hp and 410 tq .. (fly wheel).
[Modified by Glock'94, 11:49 PM 12/8/2001]
exhuast probalby good for 20-25 ... computer 5-10 ... 58mm TB 2-5 ...
LT4 conversion by itself would have you at 340-350.. so just add up the other things.. and I'd say:
i'd say 380hp and 410 tq .. (fly wheel).
[Modified by Glock'94, 11:49 PM 12/8/2001]