Source for Clutch Slave Rebuild Kit

Reply Subscribe

Thread Tools

Search this Thread

Apr 22, 2008 | 12:07 PM

80vetteuga

Thread Starter

Advanced

Joined: Dec 2005

Posts: 52

Likes: 0

From: Jonesboro Ga

Source for Clutch Slave Rebuild Kit

Any suggestion of where I can buy a Clutch Slave Rebuild Kit for a 86 Corvette

??

Thanks

Apr 22, 2008 | 12:14 PM

MK 82

Melting Slicks

Joined: Feb 2008

Posts: 3,286

Likes: 6

From: Palm Beach

I have asked the same question. They don't appear to exist.

Apr 22, 2008 | 05:28 PM

Yellow2015

Pro

Joined: Sep 2006

Posts: 702

Likes: 2

From: Conyers Ga

Quote:

Originally Posted by 80vetteuga

Any suggestion of where I can buy a Clutch Slave Rebuild Kit for a 86 Corvette

??

Thanks

Have you tried the catalogs? ie: Ecklers, Mid America etc?

ps: you're not far from Summit in McDonough......they might have it.

Apr 22, 2008 | 05:39 PM

lead foot 85 vet

Drifting

Joined: Dec 2001

Posts: 1,313

Likes: 1

From: providence ut

I bought mine at checkers auto parts...........no big deal, if a remember right they had it in stock.

Apr 22, 2008 | 06:36 PM

80vetteuga

Thread Starter

Advanced

Joined: Dec 2005

Posts: 52

Likes: 0

From: Jonesboro Ga

I have checked with all the Corvette Vendors, Local Parts Stores, Summitt, NAPA, Rock Auto, GMParts Drirect, and no luck. Everyone wants to sell the complete unit.

Apr 23, 2008 | 02:52 PM

Kleantouch

Instructor

Joined: Jun 2005

Posts: 223

Likes: 2

From: Lake Charles LA

Did you try GMPARTSHOUSE ? they have a button on the left side of my corvette forum, and they list both slave and master cylinder rebuild kits-

http://www.trademotion.com/partlocat...layCatalogid=0

Don't know if they are in stock, and I'm not endorsing them, they just have them listed.

Good Luck

Last edited by Kleantouch; Apr 23, 2008 at 02:53 PM. Reason: name

Apr 23, 2008 | 06:02 PM

psd_bullitt

Instructor

Joined: Jan 2008

Posts: 245

Likes: 0

From: McKinney Texas

I got a clutch slave at an O'Reilly autoparts for ~$75 - it was in stock and still open at 10pm on Saturday night when I needed it!! Not a tough job but it can be tight getting under there between the headers and bellhousing. Flush the fluid well and replace it with DOT 4 fluid so you have a higher boiling point.

A Dealership may have them now as well:
NOS GM Clutch Hydraulic System Actuator (slave) cylinders (GM P/N 12509313)