Problem with new chip
Thread Starter
Drifting
Joined: Jun 2001
Posts: 1,625
Likes: 1
From: Zagreb, Croatia
Problem with new chip
I did some minor changes with TunerPro in my .bin file and
burn a new chip.
When I installed it, as soon as I turn ignition to ON fan starts to run.
I didn't even try to start the engine.
Any idea what could be wrong?
I only made some changes to PE AFR vs RPM and some IDLE settings.
I used 27c512 eprom with $8000 as start address.
burn a new chip.
When I installed it, as soon as I turn ignition to ON fan starts to run.
I didn't even try to start the engine.
Any idea what could be wrong?
I only made some changes to PE AFR vs RPM and some IDLE settings.
I used 27c512 eprom with $8000 as start address.
