what plugs and wires?
#3
Drifting
I used the stock plugs and wires from the chevy dealer. I was somewhat disappointed with the wires, I figured that they would be labeled with the plug number like the originals and fit exactly like the originals. They are not labeled and the lengths are not the same. They are certainly usable and get the job done, but next time I would probably go with some aftermarket ones that will fit just as well.
#6
Advanced
Member Since: Oct 2004
Location: Crosby Texas
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
The F-body spiro pros come with 2 coil wires. One for 96-97 and one for 93-95 models. They are the proper length, but they are a little thicker than the stock wires. A tight fit in the stock wire looms. Again, I have never purchased them for a Vette.
#7
Instructor
Member Since: Apr 2008
Location: mesquite tx
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
i just did the plugs in my 85 and just ran a/c delco. the wires are delco 8mm and they looked good so i didnt mess with them. get some nice msd 8mm wires i have heard good things about them