Coilover Question
Team Owner
Joined: Mar 2001
Posts: 30,858
Likes: 293
From: Boston, Dallas, Detroit, SoCal, back to Boston MA
The best?
Penkes, I'm putting Penske coilovers on my car with dual rate springs from my friend Gary Hoffman @ hardbarusa.com (forum vendor)
http://forums.corvetteforum.com/show....php?t=1833622
My will be similar to this C6Z06 setup:
Notice the custom mount to eliminate binding
He's coming out with a slick lower mount for the rear to eliminate bending
Penkes, I'm putting Penske coilovers on my car with dual rate springs from my friend Gary Hoffman @ hardbarusa.com (forum vendor)
http://forums.corvetteforum.com/show....php?t=1833622
My will be similar to this C6Z06 setup:
Notice the custom mount to eliminate binding
He's coming out with a slick lower mount for the rear to eliminate bending
Thread Starter
Racer
Joined: Aug 2005
Posts: 385
Likes: 0
From: Apopka Florida
I guess all three. Car handles like a hot mess of garbage right now and I would like to lower the car. It needs new shocks, so why not just upgrade?
Odd wedges and longer bolts with adj shocks or...
coilovers with the potential to fine tune and adj ride height.
I'd rather spend more and do it right. Car will see some mild roadracing but mostly street use and drag racing. coilovers weigh less I assume?
Odd wedges and longer bolts with adj shocks or...
coilovers with the potential to fine tune and adj ride height.
I'd rather spend more and do it right. Car will see some mild roadracing but mostly street use and drag racing. coilovers weigh less I assume?
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Well, Exotic Muscle will sell you non adjustable CO's.
OR you can got the route that Mo did (I went this route as well)
www.ndneyes.com
OR you can got the route that Mo did (I went this route as well)
www.ndneyes.com
